BRANDNEW FOR JACKHAMMER!

Predator XL ( jackhammer , fireteam )

€90.00 €80.00
BRANDNEW FOR JACKHAMMER!

Predator XL ( jackhammer , fireteam )

€90.00 €80.00

in coorperation with america's nr1...

 M2c RACING and BASHERBODIES !!

Has made the PREDATOR -XL ....

A SPECIAL MODEL TO FIT THE M2c lwb (long wheel based) chassis ! 

this specially designed body is made to fit the :

JACKHAMMER,

FIRETEAM. ( u need to install the plastic sides from a mojave)

(AND MOST LIKELY MOST ,IF NOT ALL OF THE XL MODELS) 

the team from m2c racing will test it on various models,so we will soon know exactly😉

Specs;

as always,it is a 4mm tough basherbodie,

Precut ( minor adjustments may be neccecary depending on your model) 

You need the kraton bodyposts in the front in stead of the 1 in the middle😊 

Numbers are in the pictures😉 be sure tu use washers on any body😉

Fast shipping, we always ship within 48 hrs with tracking ! ( we don't sell what is not in stock! ) if you can order it, it's in stock and ready to go to you

 

We are 100% confident that this is the stongest body you can get ! 

become a part of the basherbodies fanclub,and youll never look back😋

special thanks to the whole M2c RACING company and test team ,for having us be a part of this great hobby!

 

Sale!

bashbug with mountingkit fitting on xrt

€165.00 €155.00
Sale!

bashbug with mountingkit fitting on xrt

€165.00 €155.00

this bashbug will tranform the overal look and the basherbodies clip system ensure no more popping of bodies😊 

Be sure to use the special teflon washers that comes with the set💪🏼

Black or white, decalset is solld seperatly below😉 

Also check out this youtube video to get a good impression👌

  1. https://youtu.be/uIrow4gt8aQ?si=PrcZCW5UpcGJZbzk
Sale!

Fitting on X-maxx, Xrt toughtowers

€29.95 €23.99
Sale!

Fitting on X-maxx, Xrt toughtowers

€29.95 €23.99

THIS SET WILL REALY MAKE THE CHASSIS STRONGER!!!

 

Do you bash and jump your x-maxx?? Big chance,youll pull thru the screws on your towers !!! These complete ready to bolt on sets wil make your towers 10x as strong,and will ensure you can runn your basherbody long ! 

 

Remove the stock screw in the sides of the towers, and put in these toughtower blocks,and secure them with the full length screw .... you will be ready to bash within 10 minutes💪🏼

Sale!

Fitting for a Maxx v2

€85.00 €80.00
Sale!

Fitting for a Maxx v2

€85.00 €80.00

Fitting for maxx v2 !

( inner cage and skidplates are not included)

New model 😊

Precut AND pre-drilled

Decals are not included, you can select  with or without decalset below

 

This product or service is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services. Traxxas® and [insert the product trademark here MAXX®) are trademarks or registered trademarks of Traxxas, L.P.

 

We have number b choices in stock.  these have larger holes.  but you can't see any of this because of the roof and back plate.  please contact us on fb or email.


4mm precut ! 

 

470mm long and 340mm weelbase 👍 170-175 mm wide at the smallest part on the bottom ! 

Perfect for tekno,arrma,traxxas and redcat kaiju .

also fits the Team Associated Rival MT8.

Dont forget to buy a decalset below😉

 

 

Take a look at the decal sets 🤘

The Bull" kraton 8s , outcast 8s

€100.00 €93.00
Take a look at the decal sets 🤘

The Bull" kraton 8s , outcast 8s

€100.00 €93.00

Realy classic look !

Black or White, 

Pre-Cut as always !

 

2 different decalsets available..

1 full color and windowset ( full color set )

1 simple window set

 

Don't forget to check out the decalsets on our decal section in the webshop !

 

NEW !!!!!!

Sledge (fitting for)

€85.00 €80.00
NEW !!!!!!

Sledge (fitting for)

€85.00 €80.00

New from basherbodies! 

4mm pre-cut AND pre-drilled💪🏻

Made to fit the trx inner mounting system for the sledge, on asking thru email,we can precut it without the holes drilled,so it fits the arrma kraton 6s ! 

Don't forget to check the decalsets in the decalsection of the webshop ! Or below👌

 

 

This product or service is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services. Traxxas® and [insert the product trademark here MAXX®) are trademarks or registered trademarks of Traxxas, L.P.

4mm all the way around! ( YOU WONT FIND A BETTER QUALITY ANYWHERE😉)

Fully precut with holes , you don't need to drill👍 

PRECUT AND READY ONLY AT BASHERBODIES!!!!

PERFECT FIT! 

BLACK OR WHITE

Don't forget to check the decalsets in the decalsection of the webshop ! 

Wheel arches en air intake can be found in our js-parts section on the webshop😉

 

This product or service is not affiliated with, endorsed by, or associated with Traxxas, L.P., or its products and services. Traxxas® and [insert the product trademark here MAXX®) are trademarks or registered trademarks of Traxxas, L.P.