This classic new model fits the x-maxx
precut 100%
Holes drilled
Will take the stock traxxas cage
4mm !!
this model comes in black or white
Don't forget to check the decalsets in the decalsection of the webshop !
Fitting on a , x maxx
4mm all the way around! ( YOU WONT FIND A BETTER QUALITY ANYWHERE😉)
Fully precut with holes , you don't need to drill👍
PRECUT AND READY ONLY AT BASHERBODIES!!!!
PERFECT FIT!
BLACK OR WHITE
Don't forget to check the decalsets in the decalsection of the webshop !
Wheel arches en air intake can be found in our js-parts section on the webshop😉
This basherbodie will fit the traxx xrt together with our 2 new designed bodyposts! The price contains:
1x bodymount front (incl. Hardware)
1x bodymount rear (incl. Hardware)
1x precut basherbodies, 4mm material topside!
NO DECALSET , these can be bought seperat at our decalsection ... : " the bull " will fit.
New militairy look model,lots of js-parts for this model! Check the video below !!!!
Comes precut,
Black and White
Only the body, you need to put the mountings in it yourself. ( dont forget to use washers and longer screws )
needed to fit this body: 8 pc longer 3mm screws ( body is 4mm instead of the 0.4 mm lexan)
Inner traxxas system. ( re-use your old one,or get it at your hobbyshop )
Decalsets in 7 colors are available for this "arrmy" model in the decal section on this webshop
decalset is not included
Bashbug
Bashbug
Fitting for x-maxx
brandnew!! Comes precut, including the new designed rear mounting kit!
Be sure to follow the mounting instructions...
Vid on facebook and on youtube by nbrc "how to bashbug"
basic comes down to 1 thing... use washers between the body and the bodyclips, otherwise the bodyclips will pull thru👌
New!! Ad-ons for the bashbug.. green and black, look in the js-parts corner
No more popping off
Decalset !!!!🤘 SOLD SEPERATLY IN THE " DECAL " SECTION ON OUR WEBSHOP
Realy nice classic look ...
verry solide model!
Black or White,
precut!
4mm at the top
Decals available, not included
check out the decals on the decalsection on the webshop
A verry unique desighn that will turn a lot of heads!
Witch is shaped to maximize straingth to be even tougher!
decalsets available
Decals not included
4mm on top,
Pre-Cut as always !
Don't forget to check the decalsets in the decalsection of the webshop !
Fitting for maxx v1
Perfect fit, 4mm !
Comes pre-cut
DON't FORGET TO CHECK OUT THE DECALS IN THE DECALSECTION OF OUR WEBSHOP !
Black or white
Decals seperate .. yes or no
For a body for a maxx v2, youll need to get the universal 1:8 dodge charger.. that body can be fitted with our new mountingsystem in the rear!
Fitting For the maxx v1!
With the rear mounting system.! ( you need the original front
Brandnew !
Precut ! ( no holes )
4mm at the topside
MOUNTINGSYSTEM SOLD OUT.
IF YOU WANT THIS PLEASE CONTACT US
Fitting for your dragslash
drag, noprep drag racers
Pre-Cut
4mm topside!
perfect for testrunns !
300mm wide, 560mm long
Precut
fits corally dr10
traxxas dragslash
Fitting for a maxx v2
For the maxxx v2 !
With the rear mounting system.! ( you need the original front
Brandnew !
Precut ! ( no holes )
4mm at the topside
Fitting for your e-maxx and t-maxx
Universal maxx-x
clean, strong model , with a smooth rear bed suface to fit on most 1/8 scale bashers
This one will fit on a lot of cars,
460mm long and 180mm wide
AS ALWAYS: PRE-CUT
4mm at the topside
DON't FORGET TO CHECK OUT THE DECALS IN THE DECALSECTION OF OUR WEBSHOP !
Black or white
Hpi
Corally Punisher
Traxxas Slash
Arrma Senton ea.
Tekno mt410
Arrma Kraton 6s
One of our bestselling products,wil fit almost any 1\8 scale
as always it comes Pre-Cut
And with 4mm at the top,it is a beast !
470mm long
180mm wide
Fitting :
Redcat : kaiju
Tekno : mt410
Hpi: savage
Arrma: kraton
Traxxas : e-revo , maxx v2 (use proline mounts
And way more models!